SMOK RPM40 Pod Mod Kit

Built to be small, stylish, and ergonomic, the SMOK RPM40 Pod Mod Kit is the newest addition to SMOK’s already illustrious line of pod systems. Featuring a distinct rectangular body, the RPM40 is incredibly comfortable in the hand and comes with carbon fiber or resin inlay panels. Internally, the SMOK RPM40 Pod Mod comes equipped with a 1500mAh cell and can deliver up to 40W of power, with variable wattage support. All of the information can be found on a 0.96” TFT screen, and all of the device’s functions are controlled with three basic buttons. The SMOK RPM40 Pod Mod Kit comes with 2 types of compatible press-fit pods, which each come with a pre-installed coil. One of the pods has a 4.5mL capacity and comes with a DC 0.6Ω coil rated for 20W, while the other pod has a 4.3mL capacity and uses an RPM mesh 0.4Ω coil rated for 25W. Finally, the device features large airflow channels, located at the top of the device’s body and designed to pull air onto the coil.

MSRP: 49.99
Our price: 30.19 39.6079 % margin 30.19 CAD

You need to login to see the price

49.99

Product not available

SMOK may be best known for its expansive line of high-power variable wattage devices, but the brand has recently made strides in the pod system market, especially with the release of the RPM40 Pod Mod Kit. What truly separates this device from the rest is its variable wattage control, as well as a large screen to display all the necessary information. In essence, this new pod device from SMOK aims to bridge the gap between large variable wattage mods and portable pod systems.

In terms of construction, the RPM 40 is constructed from an aluminum alloy. This allows the device a sense of ruggedness while still being quite lightweight and easy to carry. Speaking of the device’s construction, we should also note that the body of the RPM 40 was designed with ergonomics in mind. The rounded bevels make the device very comfortable to hold, while beautiful carbon fiber or resin panels give the device a distinct look. The raised firing button on the device is quite comfortable to use and offers a nice tactile feedback, the same can be said about the plus/minus buttons on the RPM 40. Finally, the large 0.96” TFT screen helps relay information to the user, and blends well into the body of the RPM 40. Large airflow channels can be found on the body of the device and the draw is determined by the amount of open airflow and the coil itself. 

Internally speaking, the RPM 40 Pod Mod Kit comes equipped with a 1500mAh internal cell, which can be charged via micro USB in just under 2 hours. The device utilizes the advanced IQ-R chipset, which allows for up to 40W of power and a firing speed of 0.001 seconds. 

In the RPM 40 Pod Mod Kit, you’ll find 2 types of press-fit cartridges, which are compatible with different types of coils and come pre-installed with coils. The first of the cartridges, is a SMOK Nord pod and has a capacity of 4.5mL and comes with a Nord DC 0.6Ω coil rated for 20W. The second cartridge is proprietary to the RPM 40 and has a 4.3mL capacity. This catridge comes pre-installed with an RPM mesh 0.4Ω coil rated for 25W. Both of the cartridges allow for both mouth-to-lung inhales and direct-to-lung draws.           

Features:

  • Dimensions: 25mm * 25mm * 99mm

  • Weight: 99g

  • Construction Materials: Polycarbonate & Aluminum Alloy

  • Battery Capacity: 1500mAh

  • Output Wattage: 1W - 40W

  • Input Voltage: 3.3V - 4.2V

  • Output Voltage: 0.5V - 4.1V

  • Charging Current: 0.88A

  • Charging Voltage: 5V

  • Resistance Range: 0.2 - 2.5Ω

  • IQ-R Chipset:

    • 0.001S Firing Speed

    • Wattage lock

    • Power lock

    • Safety Features:

      • High temp protection

      • Short circuit protection

      • 8 second cut-off

      • Low voltage protection

  • 2 Compatible Press Fit Pod Types:

    • Nord Pod:

      • 4.5mL capacity

      • Nord coil series compatible

      • DC 0.6Ω coil rated for 20W included

    • Standard Pod:

      • 4.3mL capacity

      • RPM coil series compatible

      • RBA available separately

      • Mesh 0.4Ω coil rated for 25W included

  • Large Airflow Channels

  • Ergonomic Design

  • Raised Firing Button

  • Plus/Minus Adjustment Buttons

  • 0.96” TFT Screen

    • Wattage

    • Resistance

    • Voltage

    • Puff counter

    • Puff timer

  • Micro USB Charging

Includes:

  • 1x RPM40 Device

  • 1x RPM Standard Pod

    • RPM mesh 0.4Ω coil preinstalled

  • 1x Nord Pod

    • Nord DC 0.6Ω coil preinstalled

  • Micro USB Cable

  • User Manual

Specifications for SMOK RPM40 Pod Mod Kit

color Bright Black or Prism Chrome or Prism Rainbow